Configuring a Lenovo Storage V series system to be NEBS-compliant

For operation in Network Equipment-Building System (NEBS) compliant installations, the Lenovo Storage V series system can be configured to extend its operational temperature range to meet NEBS operating temperature requirements.

Note: The Lenovo Storage V series system might not be able to save its cache and state data if the power fails while it is operating within the extended temperature range. This is because the battery capacity decreases as temperature rises. If the save of cache and state data cannot be completed, an extended service action is required to recover the system and data might be lost. Keep the temperature within the normal operating range if possible, and maintain a reliable power supply.

To extend the operational temperature range of all enclosures in the system to meet NEBS operating temperature requirements, enter the following CLI command:
```
chsystem -hightempmode on
```
After it is set, high_temp_mode is applied to all enclosures in the system.
To configure the default operating temperature ranges, enter the following CLI command:
```
chsystem -hightempmode off
```
To determine which mode is configured, read the value of the high_temp_mode parameter in the lssystem output.

Notes:

Configuring the Lenovo Storage V series system to be NEBS-compliant only changes the way that the system responds to raised temperature. You must also ensure that the way the system is racked, and the operating environment, conforms to NEBS requirements. See NEBS-compliant earth connection.
For more information about Lenovo Storage V series configuration guidelines and restrictions, see the following website: https://support.lenovo.com/us/en/solutions/ht505190
If a Lenovo Storage V series system is clustered with a Lenovo Storage V series system, NEBS compliance cannot be enabled. NEBS compliance is not supported on Lenovo Storage V series systems.