chhostcluster

Use the chhostcluster to change the name, type, or site of a host cluster object that is part of a host cluster.

Syntax

 chhostcluster  [  -name  new_name  ] [  -type  new_type  ] { [  -site  new_site  ] | [  -nosite  ] } [  -force  ] {  hostcluster_id  |  hostcluster_name  }

Parameters

-namenew_name
(Optional) Specifies a name for a host cluster object. The value must be an alphanumeric string.
-typenew_type
(Optional) Changes the type of the all hosts in the host cluster. The values are:
  • generic indicates the default
  • tpgs indicates when target port information changes, extra unit attentions are given to the host)
  • openvms indicates OpenVMS
  • adminlun indicates virtual volumes, which are enabled on the host
  • hpux indicates HP-UX firmware
  • epps indicates epps
  • hide_secondary indicates that all remote copy relationship secondary volumes are unavailable to the host
-sitenew_site
(Optional) Changes the site for all hosts in the host cluster. The value must be an alphanumeric string and the default is site0 (meaning there is no site).
-nosite
(Optional) Resets the site value.
-force
(Optional) Specify this parameter to change the host cluster's site and also change a site for at least one host in that host cluster. (You do not have to specify this parameter if you are changing site 0.)
Remember: Using the force parameter might result in a loss of access. Use it only under the direction of your product support information.
hostcluster_id | hostcluster_name
(Required) Specifies (by ID or name) the host cluster object to change. The value for the ID must be a number and the value for the name must be an alphanumeric string.

Description

This command changes the name, type, or a site on a host cluster object.

If you assign a host to a site and it is not specified as site0, you must use -force to change it.
Important: Do not specify -site site0, instead use -nosite.

If you specify the -site and -type parameters, note that the site and type properties changed are not attributes of the host cluster object. They are properties of the individual hosts that are members of the host cluster. These properties can be modified using the chhostcluster command to change the attribute values on every host in the host cluster simultaneously (rather than modifying each host separately).

An invocation example that changes settings of host cluster hostcluster0

chhostcluster -name myhostcluster hostcluster0

The detailed resulting output:

No feedback

An invocation example that changes site of every host in host cluster 2

The hosts are currently in site 0 or in site1.

chhostcluster -site site1 2

The detailed resulting output:

No feedback

An invocation example that changes name of hostcluster0

All host sites are set to site0, which is the default. One host is not currently in site 0.

chhostcluster -name jvardy1 -nosite -force hostcluster0

The detailed resulting output:

No feedback